ISO 10373-3 PROTOCOL CARD

The ISO 10373-3 protocol card test tools performs timing, T=1, T=0, block management test, to check conformance with the ISO 7816 specification.
ISO 10373-3 PROTOCOL CARDISO 10373-3 PROTOCOL CARD
ISO 10373-3 PROTOCOL CARDISO 10373-3 PROTOCOL CARD

ISO 10373-3 PROTOCOL CARD

Use Cases


Our ISO 10373-3 Protocol card validation platform will typically be used in the following contexts :
  • Characterisation of the ISO 7816 protocol handling of a contact smartcard
  • Compliance testing with the ISO 7816 of a contact smartcard
Our ISO 10373-3 Protocol test suite for contact smartcards will allow you to perform protocol testing of your contact smartcard, by verifying its good timing management, its resilience to protocol errors, as well as its handling of the T=0 and T=1 protocols
The ISO 7816-3 document defines the behavior of contact terminals and smartcards : which signals shall be used, which levels of voltages, which data shall be sent... The ISO 10373-3 document defines methods to check the compliancy of terminals with the ISO 7816-3. Micropross supplies to the market innovative and efficient solutions to perform this compliance checking in an automated manner.
The main features of those solutions are :
  • Highly qualitative test plan : several dozens of test cases, to verify all parameters defined in the ISO 7816-3 specification
  • Fully automated operating
  • Automated generation of test reports
  • Open for customisation of the test methods
  • Integrated viewer, for a better failure analysis

Technical data

This test library will test a contact smartcard, by checking parameters such as :
  • the building of its ATR
  • its handling of the T=0 protocol
  • its handling of the T=1 protocol
  • its resilience to protocol errors
  • extended APDU handling
At the end of the test session, a report is generated, while the User Interface allows the user to check the results, and get the explanation in case there is some failure.
Hardware platform :
Test case coverage :
Dozens of different test scenarii, generating the test conditions defined in the ISO 10373-3 specification, such as :
  • test of the ATR
  • timing management (WWT, BWT, CWT, EGT, …)
  • T=1 protocol management (retransmission, window reception negociation, …)
  • PPS exchange
Selected products : 0
    Your selection is empty