QI BASELINE POWER PROFILE TRANSMITTER

WPC test solution is following at 100% the requirements defined in the 'System Description Wireless Power Transfer Volume I: Baseline Power Profile Part 3: Compliance...
QI BASELINE POWER PROFILE TRANSMITTERQI BASELINE POWER PROFILE TRANSMITTER
QI BASELINE POWER PROFILE TRANSMITTERQI BASELINE POWER PROFILE TRANSMITTER

QI BASELINE POWER PROFILE TRANSMITTER

Use Cases


This WPC test solution will typically be used in the following contexts :

  • certification of power transmitters towards the specifications edited by the WPC (Wireless Power Consortium)
  • pre-certification at vendor R&D labs of power transmitters
Following the recommendations defined by the WPC (Wireless Power Consortium), this solution allows to test the compliance of a contactless power transmitter (for example wireless chargers). It is testing the Baseline Power Profile (BPP) variante. The WPC (Wireless Power Consortium) defines a framework of test procedures. It aims at verifying the global interoperability of power transmitters with power receivers. Even though our offering covers both receiver and transmitter testing, in both BPP and EPP variantes, this solution here focuses on transmitter testing, in the BPP mode. This solution is based on the MP500 TCL3 tester, and the dedicated WPC accessory kit. Therefore, our solution has the unique asset of enabling both Wireless Charging, but also NFC testing. The same hardware will be used for the 2 technologies. Following at 100% the requirements defined in the 'System Description Wireless Power Transfer Volume I: BPP 3: Compliance Testing', the main characteristics of this solution are :
  • one compact test tool, embedding all necessary generation and measurement features
  • availability of all normative accessories (TPR, TPT, Foreign objects, Thermo couple, …)
  • fully automated operation mode, for less mistakes in the measurement
  • automated generation of test reports
  • easy migration to Extended Power Profile testing, as well as receiver testing

Technical data

The WPC test set is made of the following items :

The MPManager test platform takes control of the MP500 TCL3, and performs test sessions according to the requirements of the WPC. Physical measurement are done automatically by the MP500, and the test platform gives a clear verdict, and displays the reason why a test case passes, or fails.

The coverage of the BPP tests includes:

  • load modulation amplitude
  • selection
  • ping phase
  • signal strength
Selected products : 0
    Your selection is empty