MP300 SC2
Contact Spy Tool
Contact spy tool for certification testing towards Global Platform, and GCF PTCRB : MP300 SC2
Use Cases
The MP300 SC2 will typically be used in the following contexts :
- on site debugging sessions
- compliance testing of contact smartcard readers, banking readers, mobile phones
- solving of interoperability issues
Please take into consideration that this product is in an EOL state with the following main milestones :
- Last time buy : 30 september 2022
- End of technical support and FW updates : 31 august 2023
- End of HW support : 31 march 2026 for products purchased after 7 february 2022, and 31 march 2024 for products purchased before 7 february 2022
What is MP300 SC2 ?
The MP300 SC2 is the most complete test tool on the market when it comes to the simulation of secure elements used in the context of banking, or mobile transactions. Furthermore, its embedded spy feature help to establish a diagnosis in the solving of interoperability issues. The MP300 SC2 main features are :- protocol analysis of ISO 7816, SWP/HCI, I2C, DCLB, NFC-Wi protocols (low level, high level, bits, bytes, frames, transactions)
- simultaneous protocol spy (for example, ISO 7816 vs SWP/HCI vs I2C)
- analog measurement feature (voltage, current, on user selected pin)
- simulation of secure elements following the ISO 7816, SWP/HCI, I2C, DCLB, NFC-Wi physical layers
- open platform : user can customize all protocol (bit lengths, timings, ...) and physical parameters (rise/fall times, voltages, current, ...)
- open platform : user can program any kind of test scenario, including errors (CRC, parity, timings, ...)
- various types of probes available (ID1, SIM, micro SIM, nano SIM, M2M, ...)
- off the shelf conformance test libraries available (ISO 7816, EMVCo, SWP/HCI (ETSI TS 102.694-1, ETSI TS 102.695-1 and ETSI TS 102.695-3))
Technical Data
Supported protocols
Spy features
Available Tests
Related solutions
EMV L1 Contact Terminal Protocol
Our EMV L1 Contact Terminal Protocol test suite for contact terminals will allow you to perform protocol testing of your contact reader. It is verifying its good timing management, its resilience to […]
ISO 10373-3 PROTOCOL TERMINAL
Our ISO 10373-3 Protocol test suite for contact terminals will allow you to perform protocol testing of your contact smartcard, by verifying its good timing management, its resilience to protocol errors, as well as […]
SWP-HCI CLF
On top of the MP300 SC2 and MP500 TCL3 allowing to perform electrical and protocol test of SWP enabled NFC devices, we propose a test library following the requirement of […]
Related accessories
MPManager 3
All MP300 and MP500 devices come supplied with the MPManager user interface. The job of MPManager is to give access to all of the functionalities of your tester, in an […]