MP500 TCL3
High End & Ultra Performant Tester For NFC Devices
Test of contactless smart cards, readers, and NFC devices are the main uses of the MP500 TCL3. It combines advanced signal generation features to an unmatched flexibility and possibilities of evolution.
Use Cases
The MP500 TCL3 will typically be used in the following contexts :
- Type approval of contactless smart cards, readers, and NFC devices
- OS debugging
- Qualification of prototypes (characterisation)
- Test of smart watches
What is MP500 TCL3 ?
Characterization of contactless smart cards, readers, and NFC devices are the main uses of the MP500 TCL3. It combines advanced signal generation features to an unmatched flexibility and possibilities of evolution. The MP500 TCL3 main features are :- Generation of terminal and smart card waveshapes, according to the following specifications : ISO 14443 A/B, ISO 15693, FeliCaTM, MifareTM, NFC Forum tags (1,2,3,4,5)
- Support of VHBR exchanges (Very High Bit Rates) in both ASK and PSK mode
- Ideal tool to test active load modulation components
- Internal spy feature embedded (spy between the tester and the Device Under Test)
- Possibility to adjust all specifications defined physical parameters (field strength, carrier frequency, rise/fall time, ...)
- Presence of an arbitrary signal generator, in order to define advanced perturbations
- Integrated measurement of resonance frequency / Q factor like a VNA (definition of the power generated by the tool to perform the measurement)
- Measurement of complex impedances (resistance / capacitance / inductance)
- Solutions to test compliance with ISO 10373-6, ISO 10373-7, NFC-IP1, NFC-IP2, NFC Forum, EMVCo, ICAO standards
- Evolutivity to Wireless Charging testing (Wireless Power Consortium)
- Open platform : use the MPManager software, or our Dll driver to program your own test sequences
Technical Data
Supported Protocol
Programmable parameters
Spy feature
Available tests
Dimensions
Related solutions
EMV L1 Contactless Card Digital
We deliver part of the Contactless Test Station an EMVCo test tool to perform conformance test of contactless smartcards and NFC enabled mobile phones from a digital standpoint.
EMV L1 Contactless Terminal (and COTS) Analog
Micropross now NI provides part of the Contactless Test Station an EMVCo test tool to perform conformance test of contactless terminals, COTS and NFC enabled mobile phones from an analog […]
EMV L1 Contactless Terminal Digital
We provide part of the Contactless Test Station an EMVCo test tool to perform conformance test of contactless terminals from a digital standpoint. The nature of the test is linked to the […]
EMV L1 Mobile Performance Test Suite
This tool performs a statistic inspection of the performance of a device. The device should be used to perform mobile payment from a transaction time standpoint. The tool automatically executes […]
NFC FORUM ANALOG
We provide part of the Contactless Test Station III a fully automated NFC Forum analog test bench. It allows to make sure that a NFC device satisfies the requirement of […]
NFC FORUM DIGITAL
Our NFC Forum digital test tool fully implements the test cases defined in the NFC Forum’s Digital Protocol test specification. This tool helps to ensure the good handling by a […]
NFC FORUM LLCP AND SNEP
The NFC Forum LLCP and SNEP test tools allows to make sure that a NFC device complies with the NFC Forum requirements. It especially concerns the handling of high level messages.
NFC FORUM TAG PERFORMANCE
The NFC Forum has defined as part of the TR11.1 specification update new test items, around NFC tags.
NFC FORUM TAG APPLICATION
The test of tags became an important topic for the NFC Forum as they are a very important part of the NFC ecosystem. As of the TR11.1 specification update, the […]
ISO 10373-6 ANALOG PICC
Our ISO 10373-6 Analog PICC test suite allows the user to perform the different analog conformance test cases, as defined inside the ISO 10373-6:2011, and its amendments such as VHBR […]
ISO 10373-6 DIGITAL PICC
Our ISO 10373-6 Digital PICC test suite allows the user to perform the different digital conformance test cases, as defined inside the ISO 10373-6:2011, and its amendments. This is the […]
ISO 10373-6 ANALOG PCD
Our ISO 10373-6 Analog PCD test suite allows the user to perform the different analog conformance test cases, as defined inside the ISO 10373-6:2011, and its amendments such as VHBR or EMD […]
ISO 10373-6 DIGITAL PCD
Our ISO 10373-6 Digital PCD test suite allows the user to perform the different digital conformance test cases, as defined inside the ISO 10373-6:2011, and its amendments. This is the perfect […]
ISO 22536 ANALOG
Our ISO 22536 (ECMA 356) test suite allows to verify the compliance of NFC devices with the requirements of the ISO 18092 (ECMA 340) standard, from an analog standpoint. This is a standard edited before the […]
ISO 23917 DIGITAL
Our ISO 23917 (ECMA 362) test suite allows to verify the compliance of NFC devices with the requirements of the ISO 18092 (ECMA 340) standard, from a digital standpoint. Contrary to the analog test suite, the […]
ISO 10373-7 FUNCTIONNAL VICC
Our ISO 10373-7 Functionnal VICC test suite allows the user to perform the different analog conformance test cases, as defined inside the ISO 10373-7, on contactless Vicinity tags.
ISO 10373-7 FUNCTIONNAL VCD
Our ISO 10373-7 Functionnal VCD test suite allows the user to perform the different analog conformance test cases, as defined inside the ISO 10373-7, on contactless Vicinity readers.
SWP-HCI CLF
On top of the MP300 SC2 and MP500 TCL3 allowing to perform electrical and protocol test of SWP enabled NFC devices, we propose a test library following the requirement of […]
CEN-TS 16794 DIGITAL PICC
Interoperability will play an important role in the success of the launch of NFC based ticketing systems in the industry of public transportation. Our CEN TS 16794 PICC digital test […]
CEN-TS 16794 ANALOG PCD
NFC readers (PCD) that are installed at the entrance of buses, subway stations, shared bicycle areas or any other means of public transportation are vital in the value chain of […]
Related accessories
MPManager 3
All MP300 and MP500 devices come supplied with the MPManager user interface. The job of MPManager is to give access to all of the functionalities of your tester, in an […]
ISO 10373-6 TEST BENCH (CL 1,2,3)
The ISO 10373-6 test bench is our implementation of the test apparatus described inside the ISO 10373-6 specification, in order to perform functionnal test of PICC (contactless smartcards) and PCD […]
ISO 10373-6 TEST BENCH (CL 4,5,6)
The ISO 10373-6 test bench is our implementation of the test apparatus described inside the ISO 10373-6 specification, in order to perform functionnal test of PICC (contactless smartcards) and PCD […]
ISO 10373-6 CLASS 1 REF PICC
The ISO 10373-6:2015 Class 1 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
ISO 10373-6 CLASS 2 REF PICC
The ISO 10373-6:2015 Class 2 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
ISO 10373-6 CLASS 3 REF PICC
The ISO 10373-6:2015 Class 3 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
ISO 10373-6 CLASS 4 REF PICC
The ISO 10373-6:2015 Class 4 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
ISO 10373-6 CLASS 5 REF PICC
The ISO 10373-6:2015 Class 5 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
ISO 10373-6 CLASS 6 REF PICC
The ISO 10373-6:2015 Class 6 reference PICC is the implementation of the reference antenna described inside the ISO 10373-6:2015 specification.
EMVCO PCD
To perform EMVCo L1 contactless PICC or PCD analog testing. It is required to use the antennas and measurement units defined by EMVCo as their reference kit.
EMVCO PICC
To perform EMVCo L1 (EMV spec 3.0a and below) contactless PICC or PCD analog testing, it is required to use the antennas and measurement units defined by EMVCo as their reference kit. […]
NFC FORUM POLLER 0 ANTENNA
This antenna is our implementation of the NFC Forum defined Poller 0 antenna.
NFC FORUM POLLER 3 ANTENNA
This antenna is our implementation of the NFC Forum defined Poller 3 antenna.
NFC FORUM POLLER 6 ANTENNA
This antenna is our implementation of the NFC Forum defined Poller 6 antenna.
NFC FORUM LISTENER 1 ANTENNA
This antenna is our implementation of the NFC Forum defined Listener 1 antenna.
NFC FORUM LISTENER 3 ANTENNA
This antenna is our implementation of the NFC Forum defined Listener 3 antenna.
NFC FORUM LISTENER 6 ANTENNA
This antenna is our implementation of the NFC Forum defined Listener 6 antenna.
DENSO ROBOT
For particulary demanding customers, we have integrated a robot from manufacturer Denso. Its “arm” approach allows the test of objects that do not fit inside the Microbot, and its 6 […]
EMVCO CMR
To perform contactless EMVCo L1, PICC or PCD analog testing, it is required to use the antennas and measurement units defined by EMVCo as their reference kit.